Domande frequenti
How to Calibrate the Vibraphone Motor
Ultimo aggiornamento 9 anni fa
If you are experiencing any issues with your Adams Vibraphone motor not turning, or the speed of the motor is not operating correctly, please follow these Motor Calibration Steps:
Motor Calibration: Alpha, Artist, Concert, Soloist Vibraphones ( 2015 model year or later)
1. Connect the motor to power.
2. Press the start button and hold it down until the display says CAL and then release the start button.
3. The motor will start running from slow to fast, eventually reaching its maximum value. After the maximum value
is reached, the motor will stop and the display will return to the RPM value of the position of the slider. This
process can take up to one minute to complete.
4. Disconnect the motor from power.
5. Make sure that the fans are in the correct position and reconnect to power. The motor is now calibrated.
If you are still experiencing issues after this process is complete, please continue with a Service Ticket request for further assistance.
Motor Calibration: Alpha, Artist, Concert, Soloist Vibraphones ( 2015 model year or later)
1. Connect the motor to power.
2. Press the start button and hold it down until the display says CAL and then release the start button.
3. The motor will start running from slow to fast, eventually reaching its maximum value. After the maximum value
is reached, the motor will stop and the display will return to the RPM value of the position of the slider. This
process can take up to one minute to complete.
4. Disconnect the motor from power.
5. Make sure that the fans are in the correct position and reconnect to power. The motor is now calibrated.
If you are still experiencing issues after this process is complete, please continue with a Service Ticket request for further assistance.